As I may have demonstrated…(ahem)…I’m a fond user of Linux. I’d use it full time, if only StarCraft and a couple other select games would function properly and efficiently under WINE. That being said, I have found some frustration lately in searching for an ideal Linux distribution…Many of the main platforms have been progressing with […]

Well, not entirely new… I’ve designed robot arms before, however, never tested them out. Eventually, I’ll prototype this mockup and get use to the robot arm concept. Afterwards I’ll consider placing it on a robot platform and test some controls with it! Gripper still needs to be designed.

Youpiiiiieeee… Right after posting some refinements, another was made =P Added a resistor just before the op amp.

After looking a little more at my original plans, I realized there were some flaws with the original schematic. Really, all that was wrong was my indicative LED for the drive setting, dumb error, but I don’t want the indicator LED to rely on an amplified guitar signal for power…so in with the DPDT switch! […]

A few days ago, I showed you this. I decided, however, that keeping diagrams on a whiteboard that is often used for other things is impractical. So from whiteboard, to digital camera, to… Huzzah for EagleCAD! Well, the initial schematic is completed, though I also decided to develop a PCB design so I may eventually […]

A few days ago, I installed Ubuntu on my Dell XPS 15. Well, as always, there’s things that needed ironing out. Lets start this little article series (if it persists) on sound. ALSA is nice. It works…most of the time…not exactly in the case of this laptop. Sound wouldn’t output in any form. Fair enough. […]

En progr├Ęs: